Your #1 Source For Everything Under Construction

iCON Excavate iXE1-1D, iXE2-2d, & iXE3-3D

Specifications

iCON Excavate iXE1-1D, iXE2-2d, & iXE3-3D

iXE1, 1D EXCAVATING SYSTEM


The 1D excavator system uses three inclinometer sensors mounted on the boom, stick and bucket. The sensor on the stick also has a built-in laser receiver.

The system is reset by means of a laser plane or a physically defined reference height, e.g. a grade bar or curb stone height. The desired depth and slope are entered into the control box.

With this system, you only work with a one-direction slope. The arrows on the display will indicate whether you are too low, too high or “on-grade”. This information is also given by means of an audible signal, while the LED screen also displays the level in metric units or US feet.

iXE2, 2D EXCAVATING SYSTEM


Our dual-slope system combines the depth, pitch and roll – giving you a complete picture of the excavation works.

The 1D excavator system uses three inclinometer sensors mounted on the boom, stick and bucket. The sensor on the stick also has a built-in laser receiver.

An additional rotation sensor on the counterweight upgrades the system to a dual-slope capability. The 2D function uses a compass to fix the slope direction. This means that you can move the machine without the system losing the direction.

The dual-slope system contains two sensors that record the pitch and roll and compensate for the tilt of the machine. The machine can thus stand at an inclined position and still carry out leveling work around the entire machine.

iXE3, 3D EXCAVATING SYSTEM


With the 3D system from Leica Geosystems, you will work with high precision GPS and be able to monitor the excavation position by means of a digital model.

The iXE3 enables you to use the excavator for point collection and stake out activities. iXE3 is suitable for projects requiring staking out, e.g. large road and infrastructure projects and subdivisions, industrial sites or dereliction works.

Connect the machine computer via the built-in GSM modem to get quick support and transfer files. Our 3D system enables you to take the last step towards machine control. Your efficiency rate will improve by up to 30%, making it easy to gain return on the investment.

Find a Location

Contact Us

  • This field is for validation purposes and should be left unchanged.